silver project 1: sleek maxi skirt

IMGP0910 IMGP0915So this worked surprisingly well.

Back in June, I made my first project using the silver knit (probably considered a sweater knit) and plain grey knit described here. I bought the silver because I had been thinking about some sparkle for stage and thought this would complement my soft summer colouring. I don’t know that the fabric is a direct hit on soft summer – I’m not sure that it’s sufficiently muted. But then “muted” isn’t necessarily the first choice for stage either ::shrug::

I used rectangular construction: 4 equal gores/panels; seams on the princess lines (rather than at centres and sides). For width measurements: I measured below my waist (where I wanted the waistline to sit) as well as around my stride at the ankles, divided each measurement by 4 (zero ease), added 1/2″ SA to each seam. For the length: I measured waistline to floor plus 4″ for casing, hem allowance and just in case. This results in a trapezoid shape. For efficiency of cutting and minimising waste, I drew 4 nesting trapezoids directly on the fabric. The fabric has a faint horizontal stripe effect but I wanted the stripe to be vertical because I need all the help I can get in the height department, so I cut my fabric on the cross-grain, knowing that I was breaking the rules and that the outside of the skirt would probably grow in length.

Once I had the skirt and lining assembled, I put on the skirt to figure out where I wanted the waistline. I did my new standard adjustment: waist is 1″ lower in the front. I drew the seam line, sewed it, trimmed it, turned the skirt and lining right way out, and ran another line of stitching around the waist to form the bottom of the casing.

Once I had it wearable, I put it on from time to time and just to wear it or to practice my dance piece. This helpfully let out some of the inevitable stretch in length that resulted from cutting it out on the cross-grain. (It also ended up affecting the choreography because some moves looked more interesting in this “frame”.) The idea was to see if I needed to adjust the shaping at all. I’d thought that I would need to shape the seams at the top, but the stretch + zero ease + angles actually worked out just fine. The skirt is a long, narrow A-line, but it stretches around my bottom a little and looks like a slight mermaid cut.

I trimmed the bottom of the skirt and lining to give them a proper curve. I wanted the outside to be a little longer so the lining wouldn’t show. Because the outside and lining were cut exactly the same but the outside stretched in length a little, I was able to trim the same amount off of the bottom of both layers and still have the lining hidden. Slick!

It turned out better looking -and with a lot less effort – than I expected: win! I was also pleasantly surprised to find that the fabric (especially the lining) is more comfortable than I anticipated, though the fact that it’s synthetic makes it a little more sweat-inducing than I like, but it’s a small price to pay. It’s super comfy and allows a surprising range of motion considering how narrow it looks. When I was making it, I thought I’d wear it for 2-3 performances a year. Now I like it so much that I’ll be looking for excuses to wear it as “real clothes”. Quick, someone invite me to a wedding!

Ordinarily, I agonize when making clothes, and yet this project went smoothly and never got stalled. What gives?

  • Knits are so much more forgiving than wovens. It would take a major screw-up before this project was going to feel uncomfortable.
  • It was meant as a costume. It just has to look good in short bursts.
  • Skirts are easier than pants. The only section of this skirt that affects comfort is the top – from waistline to hip (widest part). Below that, comfort isn’t an issue – it’s just drape.
  • Oddly, I have a lot more experience making costumes out of geometric shapes than making real clothes using commercial patterns. My plan was to put this together on the basic lines and then fit the skirt more carefully by taking in the existing seams (the way I made my Viking apron dress). But when I tried it on, it was good enough as is and I didn’t see the need for any tweaks.
  • I started with 4m of fabric, 150 cm wide, for which I paid the princely sum of $10. It’s unknown fibre, and I expect it’s 100% synthetic. I like it enough but I don’t love it. It’s not perfect. It looks like speaker fabric mixed with steel wool. It’s the opposite of precious. When I bought it, I had one project in mind that would take about 1.5m and I had no idea what I was going to do with the rest. This turned off the perfectionism and I allowed myself to just use it.

What I learned about myself:

  • My HSP conscientiousness manifests itself with a preference for natural fibres and worry about proper disposal of waste, or, even better, avoiding it altogether. When it comes to sewing, this tends to paralyse me: it’s impossible to sew and be 100% waste-free, especially when trying something new. Rectangular construction, however, is a very low-waste approach, which allows me to relax.
  • Since I have more experience with rectangular construction than commercial patterns, patterns may also overwhelm me because there’s too much that’s new -I’m starting from scratch.
  • My HSP heightened body awareness and need for comfort coupled with my current skill level re fitting make knits an excellent choice – no matter how much I enjoy feeding crisp linen through the machine.
  • My HSP awareness of subtlety gives me a good eye for proportion and details. It may be that I get overwhelmed with the info that wovens provide in a garment (e.g. I see all these drag lines but what do I do about them all?). An eighth of an inch doesn’t matter in knits so I get to use my eye in an artistic way, rather than a scientific way. Refreshing!

silver

IMGP0670So far so good with these fabrics. The one on top I’d describe as a fine sweater knit – black and grey, with silver threads that turn into glitter and get everywhere when cut. I scored 4m for $10, 100% unknown fibre. The one on the bottom is a very plain poly knit, to be used as lining. I’d bought it a while ago with a different project in mind; I’m glad that it’s not quite as icky as I remembered it. I usually avoid synthetics like the plague, but this is for costume and I’d be surprised if I spend more than 10 hours wearing it over the course of a year.

I’m working on getting the main piece (and, with some luck, a secondary piece) done by June 22, when I have a solo at our student show.

IMGP0671
Berroco Captiva yarn (label says the colour is 5507, but it may have recently been renumbered 7507 – Polished Iron), sequinned fabric in a stormy grey, liquid metal fabric in straight up silver.

I have some ideas for some coordinating costume pieces that I’d like to make out of this stuff, but they may or may not happen. My solo is in a style other than my usual, and our studio has no other performers and no classes in this style. If I don’t get my ideas made before this show coming up, there’s not much reason to make them afterward – unless I go out of my way to look for more opportunities to solo. The costume for my usual style is very colourful, so it could be hard to integrate any of these ideas into regular rotation. Still, I’d like to see them take form.

a simple dressy top

I’ve been looking over the body shape analysis over at Inside Out Style, and I figured that I was likely an X (hourglass) or A (pear). If I’m an A, then the wisdom would be to keep hips free of ornamentation, show the waist, and add fullness at the shoulders to balance out the hips – so I bought this pattern:

Butterick 5497

But then I kept reading the blog and found other body shapes, like the 8 (similar to X but carrying weight higher on the hip). I then looked at how she measures shoulder width, and I think my shoulders may actually be wider than my hips. So I’d be a V (inverted triangle). In short, I have no idea, so I’ll just have to make up the damn thing and see how it looks.

I picked up some interesting black synthetic knit with silver thread in it. I don’t expect it to be particularly comfortable (I rarely wear synthetics) but that’s OK because it’s meant to be a special occasion top.

Black sparkle knit. In real life, it reads much more black. The sparkle is silver - not sure where the aqua tone came from.

I didn’t make a muslin but started mucking with the pattern right away. I’m doing the long-sleeved version (view C) and I noticed that the sleeve is drafted at a rather low angle for being so loose at the top of the sleeve and so narrow at the wrist. My worry was that this would constrict the range of motion.

Butterick 5497 diagram

Because I can’t leave well enough alone, I redrafted it so the top of the sleeve is on the horizontal. Hey, while I’m at it, why not put that horizontal on the fold? The shoulders are supposed to get some ruching by means of short lengths of elastic stitched into the SA. Only I don’t have an SA there now. Not sure exactly how this will play out, but I’ll think of something when I get there.

My first draft is not made of win. The measurements suggested that the length would be fine from shoulder to below bust. Not so much. It looks sloppy and dumpy, but if I hoik it up an inch or two, it’s not bad. And then I could just shorten it using… that seam I just drafted out of the pattern. Oh well. I guess I’ll have to rip out the under-bust seam. There’s a funny curve on the front seam, which bows up towards the bust. I’m sure this is supposed to have some practical application, but the effect is to create an extra flap for drooping. Not good. Since I’m ripping that seam out anyway, I’ll straighten it out like I wanted to when I first eyeballed the shape.

As this top wasn’t going terribly well, and because I’d like to make a pair of pants/trousers by early May, I thought I should put this project down and start on the trousers. Was going to get rolling on it last night, but oops, somehow this fabric escaped the pre-wash. Washed it and hung it up to dry this morning, and thought I should at least pull out the pattern pieces and see about marking the fabric. Oops, I have no idea where that pattern is après move.